 |
 Anti-Spatter Gel - 16 Ounce JarSilicone-free anti-spatter gel prevents welding spatter from sticking to nozzle, contact tip, diffusor and weld area which increses life of consumables and reduces clean up.
|
|
|
 Anti Spatter Gel - Case of 16 oz Jars (12-Pack)SAVE 10% on 12 jar case of silicone-free anti-spatter gel that prevents welding spatter from sticking to nozzle, contact tip, diffusor and weld area which increses life of consumables and reduces clean up.
|
|
|
 Anti-Spatter Spray - 16 Ounce CanSuperior non-solvent anti-spatter prevents weld spatter from adhering to MIG nozzles, contact tips & tip holders as well as serving as an excellent preventative in the weld areas to be joined.
|
|
|
 Anti-Spatter Spray - Case of 16 oz Cans (12-Pack)SAVE 10% on 12 can case of superior non-solvent anti-spatter prevents weld spatter from adhering to MIG nozzles, contact tips & tip holders as well as serving as an excellent preventative in the weld areas to be joined.
|
|
|
 Weld-Aid 007089 Weld-Kleen 350 Anti-Spatter 1Qt (1EA) Weld-Aid Weld-Kleen 350 Anti-Spatter is non-flammable, paintable, non-silicone, biodegradeable and water soluable.
|
|
|
 Anti-Spatter Dynaflux DF400 Enviro-Spat (1 Gallon)Economical one gallon bottle of superior non-solvent anti-spatter prevents weld spatter from adhering to MIG nozzles, contact tips & tip holders as well as serving as an excellent preventative in the weld areas to be joined.
|
|
|
 MIG Wire Cleaning Pads - Treated (3-Pack) These pre-treated wire cleaning pads remove oxidation and contamination from the welding wire before the wire goes into the weld gun liner/cable. Prolongs the life of the liner and contact tip and reduces costly down time.
|
|
|
 MIG Wire Cleaning Pad - Non-TreatedThese untreated wire cleaning pads remove contamination from aluminum welding wire before the wire goes into the weld gun liner/cable. Prolongs the life of the liner and contact tip and reduces costly down time.
|
|
|
 Pad Wire Cleaner / Lubricant (4 oz Bottle)A few drops of this cleaner/lubricant on the wire cleaning pad every few days helps prolong the life of the Mig gun liner and front end parts by reducing wire contamination and drag.
|
|
|
 HTR-30 Heat Tint Remover (19 oz Bottle)------HTR-30 Chemical Heat Tint Remover------
Effective in Removing Heat Tint & Discoloration
On Stainless Steel, Caused by High Weld Tempratures
Works without Electricity, Wipe on - Water Rinse Off
|
|
|
 Tungsten Pointing PowderSharpens Tungstens without Grinding, Splintering, Flat Spots or Ridges. Pointing Tungsten electrodes using the Tig torch as a heat source.
|
|
|
 HTR121S Electro-Chem Heat Tint Removal SystemSave time and money and eliminate the "Blue Heat Stain" from welded areas on stainless steel. Wipe-on charged applicator with 115 volt adjustable power supply.
|
|
|
 HTR120 Heat Tint Remover (16 oz. Bottle)Chemical solution for removing discoloration from stainless steel after welding with HTR121 system.
|
|
|
 HTR120 Heat Tint Remover (1-Gallon) Chemical solution for removing discoloration from stainless steel after welding with HTR121 system.
|
|
|
HTR121-7 Roller Applicator & LeadStandard roller applicator wand with power lead attaches to the HTR120/121 heat tint removal systems.
|
|
|
HTR120-8A Roller Applicator Replacement PadsReplacement pads for roller applicator on HTR120/121 systems.
|
|
|
HTR121 Spoon Applicator & LeadStandard spoon applicator wand with power lead attaches to the HTR120/121 heat tint removal systems.
|
|
|
 HTR120-3A Replacement Boots (6-Pack)Replacement boots for spoon applicator on HTR120/121 systems.
|
|
|
 Coolant - Pump Lubricant - Antifreeze ConcentrateClear low solids liquid coolant is specifically designed for closed-loop water cooled welding systems to insure steady flow rates in the most compact torches and keep the pump, chiller and flow controls operating at maximum performance.
|
|